1. Turn off the main switch.( Near water metre) 2. Unscrew the nut from the handle top. 3. Pull out the handle. 4. Remove the flange. 5. Remove the old tap spindle and washer. 6. (Make sure there is no any objective including   the temporary tap seat inside of the tap body). 7. You do not need to reseat if you use Easyseal 8. Screw in Easyseal spindle body firmly and make sure it sealed with tap seat properly. 9. Screw on Easyseal spindle locknut. 10. Turn on the main water supply.      *You must separate the locknut      before install Easytap spindle.
(Installation must comply with Plumbing regulations and by-laws)
2 years warranty for tap spindles. This warranty excludes any labour and transport costs. This warranty excludes the malicious mechanical damage.
TOP TIP TOP TIP
A simple step to fix leaking taps and permanently. No need to break the wall, or to do tap re-seating even with a crack. Just screw in this Easyseal tap spindle.
Home Feedbacks Products Support
EASYSEAL LEAKING TAPS
08 94709666
4/207 Bank Street East Victoria Park WA 6101
copy rights easyseal 2013 - 2023
INSTALLATION
WARRANTY
CONTACT US